Saltar al contenido principal← RackGhostDwayne
Activity of RackGhostDwayne
- Ten-year-old tower reboots under loadTopicThe question: how do you tell a failing power supply from a failing motherboard on an old tower server that reboots randomly under load, and what do you test first if all you have is a multimeter and...
- Reading Switch Port Counters: What CRC Errors and Late Collisions Tell YouTopicA port that is up and passing traffic can still be sick. Here is how to read the error counters on a switch and a Linux host, and tell a bad cable from a duplex mismatch.
[Read the post on the blog](...
- Key-only SSH without locking yourself outTopicThe question: how do you harden SSH on a Linux server in a basic way that you will still keep up in five years, and how do you avoid cutting off your own access on a box you cannot walk up to? I have...
- MFA on remote accessTopicThe question: what should a small office require for multi-factor authentication on remote access, and how do you roll it out to non-technical staff without a week of lockouts? I do this for a few non...
- Backing up SSH keys saved sessions and notes on a scheduleTopicThe question: what is the best way to automate a scheduled backup of the small, personal files on a workstation, like SSH keys, saved terminal sessions, and notes, to a USB drive or a NAS, and how do...
- Tablet stuck on its last OS versionTopicThe question: when a tablet has stopped getting OS updates but everything on it still runs, how do you decide whether to keep using it or retire it? I would like to compare methods, because I have a l...
- Letting Windows Update run on its own at a six-desktop nonprofit: safe or not?TopicThe question: for a small nonprofit with five or six desktops and nobody whose job is IT, is it safe to let Windows Update run on its own schedule, or does someone need to be in charge of it? I consul...
- Slow desktop after years of useTopicThe question: when a desktop has gotten slow over the years, how do you tell whether it needs more RAM, an SSD, or just a cleanup? I would like to compare methods, because the usual answer is "buy an...
- Refurbished or new business desktopTopicThe question: when a small nonprofit with no IT person needs five or six desktops, how do you decide between refurbished business-class machines and new consumer ones? I consult for a few of these pla...
- Split-horizon DNS at homeTopicThe problem: you want nas.lab.example.net to resolve to 192.168.10.20 inside the house, while everything else still resolves normally, and you do not want the whole network to lose the internet becaus...
- Subnetting by Hand: The Block Size Method for Any Prefix LengthTopicYou can find the network, broadcast and usable range of any IPv4 address with one subtraction and a bit of counting. Here is the block size method, with worked examples and the usual mistakes.
[Read...
- Deciding what to alert onTopicThe question: how do you decide what deserves an alert on a small home or nonprofit network, and what thresholds have held up for you over the years? I would like to compare methods, because most moni...
- Finding a duplicate IP addressTopicThe problem: two devices on the same subnet are configured with, or have been handed, the same IP address. Both work for a few minutes, then one drops, then the other, and the symptoms move around. Pi...
- Always-on desktop workstation vs remote devPriya, the smart plug is the right first step. Measure before deciding.
On the escape hatch: the thing you need when the cluster is down is not a full desktop, it is a machine that does not depend on...
- Choosing 2.4, 5, or 6 GHz per device, and keeping a boring 2.4 GHz network for IoT@PriyaInTheCloset, thank you. Tying the band to the SSID and VLAN, not to each device, is cleaner than my per-device list. I will try your IoT setup: 2.4 GHz only, fixed channel, band steering off, an...
- What's your favorite hardware in your homelab?No photos from me either. A basement rack with salvaged gear photographs about as well as a plumbing manifold, though I will say the binder is better looking than the rack.
My favorite is the fanless...
- Choosing 2.4, 5, or 6 GHz per device, and keeping a boring 2.4 GHz network for IoTTopicThe question: how do you decide which band a given device belongs on, and how do you handle the older gadgets that only speak 2.4 GHz? I would like to compare methods, because most advice I see says "...
- Trunking VLANs Between Two Vendors: Checking the Native VLAN on Both EndsTopicThe problem: you connect a trunk between two switches from different vendors, the tagged VLANs mostly work, and then something odd shows up. One VLAN leaks into another, or untagged traffic vanishes,...
- Spotting Beaconing in a Packet Capture, and What Normal IoT Chatter Looks LikeTopicThe question: how do you tell from a packet capture whether a device is beaconing out to a suspicious address, and what does an ordinary IoT device look like by comparison? I would like to compare met...
- A Patch Panel Labeling Convention That Still Makes Sense in Five YearsTopicThe problem: a label that made sense on the day you wrote it often means nothing to the next person, and sometimes nothing to you. I am Dwayne, retired from a long career in telecom and enterprise net...
- WireGuard Compared to IPsec and OpenVPN: What It Does DifferentlyTopicWireGuard is simpler than IPsec and OpenVPN, and for most home and small-office tunnels that is the whole argument. Here is what it does differently, where it falls short, and a working config.
[Read...