Pular para o conteúdo principal
IT BIBLEEntrar

The IT Bible blog

Subscribe

Latest posts

Photo by Alex Cheung on Unsplash
Monitoring & Management

Scheduling ZFS Scrubs and SMART Tests, and Getting Alerted When They Fail

A ZFS pool can sit degraded for weeks if nothing tells you. Here is how I'm setting up scrubs, SMART tests, and a dead-simple heartbeat so a bad disk doesn't wait for me to look.

PriyaInTheCloset· · 7 min read

Photo by Volkan Olmez on Unsplash
Networking

Subnetting by Hand: The Block Size Method for Any Prefix Length

You can find the network, broadcast and usable range of any IPv4 address with one subtraction and a bit of counting. Here is the block size method, with worked examples and the usual mistakes.

RackGhostDwayne· · 5 min read

Photo by Clint Patterson on Unsplash
News

This Week in Tech: GitLab and Drupal Exploits, Supply Chain Scares, AI Launches

This roundup covers the stories from the past week that matter most to admins and home-lab builders.

WizardTux· · 5 min read

Photo by Mohammad Rahmani on Unsplash
Homelab

Late to Docker, and Why I Now Build Almost Everything With It

A short history of Docker, what it was like arriving years after everyone else, and the habits that make containers worth using for home labs and day-to-day builds.

WizardTux· · 6 min read

Photo by Wonderlane on Unsplash
Career

How Hands-On Labs Help You Learn IT Faster

Reading about IT only gets you so far. Learn why practice labs build real skill, how to get the most from them, and where to start with three IT Bible Labs.

WizardTux· · 6 min read

Photo by Jakub Żerdzicki on Unsplash
Networking

Writing Firewall Rules for a Homelab IoT VLAN, One Allow at a Time

Creating a VLAN takes five minutes. The firewall rules are the real work. Here is the rule order I use for an IoT VLAN, how I test it, and the parts I'm still unsure about.

PriyaInTheCloset· · 4 min read

Photo by Matt Wang on Unsplash
Hypervisor

Docker for Beginners: Pull, Clone and Build Your First Containers

This guide walks through three ways to get a container running: pulling a ready-made image from Docker Hub, using a project hosted on GitHub, and building an image yourself from a Dockerfile. By the e...

WizardTux· · 4 min read

Photo by Domaintechnik on Unsplash
Monitoring & Management

Running a Restore Drill on a Proxmox Homelab

A backup you haven't restored is a hope, not a backup. Here is the restore drill I'm building for my Proxmox VMs and ZFS data: what to check, what to script, and what I'm still unsure about.

PriyaInTheCloset· · 6 min read

Photo by Teng Yuhong on Unsplash
Homelab

Docker vs Kubernetes: What Homelab Beginners Need to Know

Docker and Kubernetes are often confused. This beginner guide explains what each does, how they differ, whether you need Kubernetes at home, and a practical path to start learning both.

WizardTux· · 7 min read

Get new posts by email

One email when a new post is published. Leave any time.